Save that extra Arduino you have lying around for another project, this two-for-one device has the Arduino built-in. Bluetooth Bee with Arduino is an enhanced version of the Bluetooth Bee. We added an onboard ATMEGA168 to it to make it a full-featured Arduino while maintaining the same footprint and instruction set as the Bluetooth Bee. Plus, it still allows you to stack it on XBee Carrier, XBee® Shield, and UartSBee for expansion or reprogramming; Small footprint; Identical settings and pairing methods as the Bluetooth Bee; Software serial port adopted between the Bluetooth module and ATMEGA168; Remains compatibile with XBee Carrier, XBee® Shield, and UartsBee for expansion. Hardware Features: Typical -80dBm sensitivity; +4dBm RF transmit power; Fully qualified Bluetooth V2.0+EDR 3Mbps Modulation; Operating voltage: 3.3V; Built-in antenna. Software Features: Software serial port communication method; Default Baud rate: 38400; Supported Baud rate: 9600, 19200, 38400, 57600, 115200, 230400, 460800; Under RTS/CTS data transmit-receive framework; Auto connect the last device on power as default;
Auto-reconnect in 30 minutes after out-of-range disconnection; Able to disconnect via a rising edge on PC2; Working status signal on PB2: low not working, high working; Paired-up status indicator on PIO 10(a red LED) and PIO 11(a blue LED):; Paired: red and blue blinks 1 time/2s in interval; Unpaired: blue blinks 2 times/sec; Default pincode: 0000; Application Ideas: Bluetooth communication for Arduino projects; Turn your computer into a Bluetooth device with UartSBees USB interface.
Material: PCB board
English Manual / Spec: No
Download Link: http://www.seeedstudio.com/wiki/Bluetooth_Bee-Standalone
Other Features: A product for Arduino that works with official Arduino boards.
Dimensions & Weight
Dimensions: 1.42 in x 0.94 in x 0.24 in (3.6 cm x 2.4 cm x 0.6 cm)
Weight: 0.14 oz (4 g)
1 x Module